manualshive.com logo in svg

Fiat Strada, Owner'S Handbook Manual, Page: 165 / 195

Share
Download
Fiat Strada Owner'S Handbook Manual Download Page 165

163

Never use flammable
products, such as

petroleum ether or modified
petrol, to clean the inside of
the vehicle. 
The electrostatic charges which
are generated by rubbing
during the cleaning operation
may cause a fire.

WARNING

Do not keep aerosol
cans in the vehicle: they

might explode. 
Aerosol cans must not be
exposed to temperatures
above 50°C. Temperatures
may greatly exceed this value
inside a vehicle exposed to
direct sunlight.

WARNING

Front headlights

IMPORTANT Never use aromatic
substances (e.g. petrol) or ketenes
(e.g. acetone) for cleaning the plastic
lenses of the front headlights.

INTERIORS

Periodically check that water is not
trapped under the mats (due to
water dripping off shoes, umbrellas,
etc.) which could cause oxidisation
of the sheet metal.

SEATS AND FABRIC PARTS

Remove dust with a soft brush or a
vacuum cleaner. It is advisable to use
a moist brush on velvet upholstery.

Rub the seats with a sponge
moistened with a solution of water
and neutral detergent.

Summary of Contents for Strada




































































































































































































Reviews:

No comments