Fiat Strada, Owner'S Handbook Manual

Page: 83 / 195

fig. 78
F0X0058m
fig. 79
F0X0060m
fig. 80
F0X0061m
SUN ROOF
Some long cab versions may be
equipped with tilting sun roof which
can also be completely removed
according to ventilation
requirements inside the cab.
Tilting function
Turn the ring nut in fig. 78 in the
direction indicated, so that the sun
roof can be opened to the desired
position.
When the device is opened as far as
possible, the ring nut will be vertical.
Removing glass from sun roof
The following steps describe the sun
roof glass removal procedure. This
operation must be carried out with
extreme caution, so that the glass
does not fall and result in damage:
– move the sun roof to the
maximum opening position;
– release the red stop fig. 79,
applying light pressure as indicated
(this operation must be carried out
using the end of the screwdriver in
the tool bag, located under the
passenger seat);
– from the luggage compartment,
remove the glass from the sun roof
and detach it from its front housing,
pulling it backwards;
– insert the sun roof glass, using the
tilting ring nut located near the
luggage compartment in the space
between the rear window and the
protective mesh; then slide it
between the two guides provided, as
illustrated in fig. 80;
– lock the sun roof glass to the
protective mesh with the rubber
strap A provided;
81