Fiat 500X 2019 Owner'S Manual Download Page 156 | Manualshive

Page: 156 / 468

background image

performance is no longer present, the system will return to
its full performance state. If the problem persists, see an
authorized dealer.

Service Full Brake Control System Warning

If the system turns off, and the instrument cluster display
displays:

•

Service Brake Control

This indicates there is an internal system fault. Although
the vehicle is still drivable under normal conditions, have
the system checked by an authorized dealer.

“Brake

Control

Front

Radar

Sensor

Temporarily

Blocked” Warning

The “Brake Control Front Radar Sensor Temporarily
Blocked” warning will display when conditions temporar-
ily limit system performance. This most often occurs at
times of poor visibility, such as in snow or heavy rain. The
system may also become temporarily blinded due to
obstructions, such as mud, dirt or ice. In these cases, the
instrument cluster display will display “Brake Control
Front Radar Sensor Temporarily Blocked” and the system
will deactivate.

The “Brake Control Front Radar Sensor Temporarily
Blocked” message can sometimes be displayed while driv-
ing in highly reflective areas (i.e. tunnels with reflective
tiles, or ice and snow). The system will recover after the
vehicle has left these areas. Under rare conditions, when
the radar is not tracking any vehicles or objects in its path
this warning may temporarily occur.

If weather conditions are not a factor, the driver should
examine the sensor. It may require cleaning or removal of
an obstruction. The sensor is located behind the lower
grille. In absence of visible obstructions on the bumper, it
could be necessary to wipe off the radar directly on the
surface, after having the radar cover removed. It’s recom-
mended that an authorized dealer performs this operation.

NOTE:

•

If the “Brake Control Front Radar Sensor Temporarily
Blocked” message occurs frequently (e.g. more than
once on every trip) without any snow, rain, mud, or
other obstruction, have the radar sensor realigned at an
authorized dealer.

154 SAFETY

«
...
154
155
156
157
158
...
»

Summary of Contents for 500X 2019





















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 500X 2019

Brand: LaserTrack Pages: 12

Wireless Charging Station Universal

Brand: BMW Pages: 160

Brand: Honda Pages: 208

Brand: TATA Motors Pages: 159

Brand: Elinchrom Pages: 101

Brand: Black+Decker Pages: 21

Brand: Beeper Pages: 20

MultiCharger 1204

Brand: DEFA Pages: 28

Brand: Steelmate Pages: 14

Brand: Honda Pages: 268

Brand: Fabbri Pages: 32

Brand: Whelen Engineering Company Pages: 2

Brand: Calix Pages: 4

C-Max Energi 2014

Brand: Ford Pages: 10

Brand: Edelbrock Pages: 2

Brand: Opel Pages: 242

Brand: SkyRack Pages: 2

Brand: Fortin Electronic Systems Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands