Fiat 500X 2019, Owner'S Manual

Page: 239 / 468

Metric Speed (km/h)
•
Pushing the SET (-) button once will result in a 1 km/h
decrease in set speed. Each subsequent tap of the button
results in a decrease of 1 km/h.
•
If the button is continually pushed, the set speed will
continue to decrease until the button is released, then the
new set speed will be established.
To Accelerate For Passing
Press the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.
Using Speed Control On Hills
The transmission may downshift on hills to maintain the
vehicle set speed.
NOTE: The Speed Control system maintains speed up and
down hills. A slight speed change on moderate hills is
normal.
On steep hills, a greater speed loss or gain may occur so it
may be preferable to drive without Speed Control.
WARNING!
Speed Control can be dangerous where the system
cannot maintain a constant speed. Your vehicle could
go too fast for the conditions, and you could lose
control and have an accident. Do not use Speed Control
in heavy traffic or on roads that are winding, icy,
snow-covered or slippery.
To Resume Speed
To resume a previously set speed, push the RES button and
release. Resume can be used at any speed above 20 mph
(32 km/h) with a maximum speed of 100 mph (160 km/h).
Deactivation
A soft tap on the brake pedal, pushing the CANC button,
ESC intervention, brake control mitigation, electronic park
brake intervention, or normal brake pressure while slow-
ing the vehicle will deactivate the Speed Control without
erasing the set speed from memory.
Pushing the on/off button or turning the ignition switch to
STOP erases the set speed from memory.
6
STARTING AND OPERATING 237