Fiat 500X 2019, Owner'S Manual

Page: 260 / 468

Detection Distances
If the sensors detect more obstacles, it is taken into account
only what is the shorter distance.
Instrument Cluster Display
Park Assist is displayed on the instrument cluster only if
you have selected the item
⬙
Sound And Display
⬙
inside the
⬙
Settings
⬙
menu of the Uconnect system.
If an obstacle is detected in the center rear region, the
display will show a single solid arc in the center rear region
and will produce a one-half second tone. As the vehicle
moves closer to the obstacle, the display will show the
single arc moving closer to the vehicle and the sound tone
will change from slow, to fast, to continuous.
If an obstacle is detected in the left and/or right rear
region, the display will show a single flashing arc in the left
and/or right rear region and will produce a fast sound
tone. As the vehicle moves closer to the obstacle, the
display will show the single arc moving closer to the
vehicle and the tone will change from fast to continuous.
In general, the car is closest to the obstacle when the
display shows only a flashing arc and the chime becomes
continuous.
The color on the display depends on the distance and
location of the obstacle.
Enabling And Disabling Park Assist
Park Assist can be enabled and disabled with the Park
Assist switch.
When the Park Assist switch is pushed to disable
the system, the instrument cluster will display
the “PARK ASSIST OFF” message for approxi-
mately five seconds. Refer to “Instrument Clus-
ter Display” in “Getting To Know Your Instrument Panel”
for further information.
The Park Assist switch LED will be on when Park Assist is
disabled or requires service. The Park Assist switch LED
will be off when the system is enabled. If the Park Assist
switch is pushed, and requires service, the Park Assist
switch LED will blink momentarily, and then the LED will
be on.
Park Assist will remember the previous state when the
vehicle is switched off.
258 STARTING AND OPERATING