EZ Entry Feature
The driver and front passenger seats have an EZ entry feature for rear seat passengers
.
Pull forward on the release lever, located on the outboard side of the seatback, dump the
seatback forward, then slide the seat forward to allow access in and out of the rear seat
.
Lift the seatback upright and push the seat
rearward to its locked position once the
rear passengers are seated
.
Memory Feature
Both front seats have a memory feature, which can operate in two ways:
Memory Function Option 1 — Full Seat Back And Track Fore/Aft Position Memory:
After using the EZ entry function, the seatback angle and the track fore/aft adjuster can
both re-lock into the position they were most recently adjusted to
.
This is accomplished if
the seat is moved fully rearward to its last fore/aft position on the tracks before the seat
back is returned upright
.
Memory Function Option 2 — Seat Back Only Memory:
After using the EZ entry function, the seat back may first be returned upright prior to
going back to the last fore/aft (memory) position on the tracks
.
This results in the seat
back memory being set only – The track will then be locked forward of its last set fore/
aft memory position
.
To then reset the fore/aft track memory feature (to reestablish
Memory Function Option 1), the seat has to be returned fully rearward to its last fore/
aft memory track position as described in Memory Function Option 1
.
EZ Entry Lever
GETTING STARTED
60
Summary of Contents for 500e 2017
Page 162: ...NOTES 160...
