Metric Speed (km/h)
•
Pushing the RES (+) button once will result in a 1 km/h increase in set speed
.
Each
subsequent tap of the button results in an increase of 1 km/h
.
•
If the button is continually pushed, the set speed will continue to increase until the
button is released, then the new set speed will be established
.
To Decrease Speed
When the Speed Control is set, you can decrease speed by pushing the SET (-) button
.
The driver’s preferred units can be selected through the Uconnect settings if equipped
.
Refer to "Uconnect Settings” in “Understanding Your Instrument Panel” in the Owner’s
Manual at www
com/en/owners/manuals for more information
.
The speed decre-
ment shown is dependant on the selected speed unit of U
.
S
.
(mph) or Metric (km/h):
U.S. Speed (mph)
•
Pushing the SET (-) button once will result in a 1 mph decrease in set speed
.
Each
subsequent tap of the button results in a decrease of 1 mph
.
•
If the button is continually pushed, the set speed will continue to decrease until the
button is released, then the new set speed will be established
.
Metric Speed (km/h)
•
Pushing the SET (-) button once will result in a 1 km/h decrease in set speed
.
Each
subsequent tap of the button results in a decrease of 1 km/h
.
•
If the button is continually pushed, the set speed will continue to decrease until the
button is released, then the new set speed will be established
.
To Accelerate For Passing
Press the accelerator as you would normally
.
When the pedal is released, the vehicle will
return to the set speed
.
OPERATING YOUR VEHICLE
71
Summary of Contents for 500e 2017
Page 162: ...NOTES 160...
