6
.
Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized
dealer as soon as possible
.
Refer to (F) “Sealant Bottle And Hose Replacement”
.
NOTE:
When having the tire serviced, advise the authorized dealer or service center that the
tire has been sealed using the Tire Service Kit
.
(F) Sealant Bottle And Hose Replacement:
1
.
Uncoil the Sealant Hose (6) (clear in color)
.
2
.
Locate the round Sealant Bottle release button in the recessed area under the sealant
bottle
.
3
.
Push the Sealant Bottle release button
.
The Sealant Bottle (1) will pop up
.
Remove the
bottle and dispose of it accordingly
.
4
.
Clean any remaining sealant from the Tire Service Kit housing
.
5
.
Position the new Sealant Bottle (1) in the housing so that the Sealant Hose (6) aligns
with the hose slot in the front of the housing
.
Push the bottle into the housing
.
An
audible click will be heard indicating the bottle is locked into place
.
6
.
Verify that the cap is installed on the fitting at the end of the Sealant Hose (6) and
return the hose to its storage area (located on the bottom of the air pump)
.
7
.
Return the Tire Service Kit to its storage location in the vehicle
.
JUMP-STARTING PROCEDURE (12 VOLT BATTERY ONLY)
If your vehicle has a discharged 12 Volt battery, it can be jump-started using a set of
jumper cables and a battery in another vehicle or by using a portable battery booster
pack
.
Jump-starting can be dangerous if done improperly so please follow the procedures
in this section carefully
.
NOTE:
When using a portable battery booster pack, follow the manufacturer’s operating instruc-
tions and precautions
.
WARNING!
Do not attempt jump-starting if the battery is frozen
.
It could rupture or explode and
cause personal injury
.
WHAT TO DO IN EMERGENCIES
116
Summary of Contents for 500e 2017
Page 162: ...NOTES 160...
