Fiat 500e 2017, User Manual

Page: 72 / 164

To Set A Desired Speed
Turn the Speed Control on . When the vehicle has reached the desired speed, push the
SET (-) button and release
.
Release the accelerator and the vehicle will operate at the
selected speed .
NOTE:
The vehicle should be traveling at a steady speed and on level ground before pushing the
SET (-) btton
.
To Deactivate
A soft tap on the brake pedal, pushing the CANC button, or normal brake pressure
while slowing the vehicle will deactivate Speed Control without erasing the set speed
memory
. Pushing the ON/OFF button or turning the ignition switch OFF erases the set
speed in memory .
To Resume Speed
To resume a previously set speed, push the RES (+) button and release . Resume can be
used at any speed above 20 mph (32 km/h) .
To Vary The Speed Setting
To Increase Speed
When the Speed Control is set, you can increase speed by pushing the RES (+) button
.
The driver’s preferred units can be selected through the Uconnect settings if equipped
.
Refer to "Uconnect Settings” in “Understanding Your Instrument Panel” in the Owner’s
Manual at www
. fiatusa . com/en/owners/manuals for more information . The speed incre-
ment shown is dependent on the selected speed unit of U . S . (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the RES (+) button once will result in a 1 mph increase in set speed
.
Each
subsequent tap of the button results in an increase of 1 mph
.
• If the button is continually pushed, the set speed will continue to increase until the
button is released, then the new set speed will be established .
OPERATING YOUR VEHICLE
70