Fiat 500 Abarth, Owner'S Handbook Manual

Page: 130 / 228

for cars equipped with 15" steel
wheels with aesthetic hub caps: take
the extractor A fig. 113 from the Owner
Handbook compartment;
163)
hold the extractor with two fingers,
insert the tab between the tyre and hub
cap A fig. 114 and pull towards
yourself, perpendicularly to the wheel;
for cars fitted with alloy wheels:
remove the press-fitted hub cap using
the screwdriver provided;
loosen the retaining bolts for the
wheel to be changed by about one turn
using the spanner provided;
if the car is equipped with side
skirts, to let the jack pass under the car,
the latter must be tilted (as shown in
fig. 115);
53)
turn the jack handle to partially open
it;
position the jack near the wheel to
be repaired at the reference point on
the side member;
Lifting the front wheel: fig. 116.
Lifting the rear wheel: fig. 117.
make sure that the jack fig. 118 is
positioned correctly;
alert any bystander that the car is
about to be raised; all persons should
be kept away from the car and nobody
must touch it until it has been lowered;
112
F0S0127
113
F0S0671
114
F0S0670
115
F0S0328
116
F0S0630
128
IN
AN
EMERGENCY