24
Instructions for Use
Copyright © 2020
DocumentID
Version
Date
24 / 33
Fiagon GmbH
DOC-19-00169 2
08-2020
EN / US
After the operation
7.1. Disconnecting the components
After the operation, disconnect the instrument and the patient localizer from the Navigation Unit Cube
4D
. Do this
by pulling the plug directly. Do not pull the cable or the kink protection. This might damage the cable.
Disconnect the navigation sensor from the navigation unit, as well.
7.2. Shutting down the system
After the operation, you can shut down the system by pressing the ON/OFF button on the Navigation Unit
Cube
4D
.
The system will shut down automatically. Once the shut-down has been completed, you can pull the plug of the
device tower. Do not pull the cable or the kink protection. This might damage the cable.
Turn the main switch of the Navigation Unit Cube
4D
to “Off Position”
à
O at the back.
