18
Instructions for Use
Copyright © 2020
DocumentID
Version
Date
18 / 33
Fiagon GmbH
DOC-19-00169 2
08-2020
EN / US
4.4. Connecting the Navigation Sensor and VirtuLink Splitter cable with the system
Insert the plug of the Navigation Sensor into the appropriate socket “sensor” (large metal socket, lowest possible
socket) on the Cube. Note that the red marking at the plug is at 12 o'clock position.
This socket is suitable to connect to all Fiagon Navigation Sensors.
Once the Navigation Sensor is connected, you will hear a confirmation tone and the status bar will appear on
the top of the navigation screen. The Status indicators for the Patient Localizer and the Instrument will be
displayed in black and white indicating that they are not connected.
status indicator of patient localizer
status indicator of instrument
Insert the plug of VirtuLink extention cable into the appropriate socket small metal socket) on the Navigation Unit
Cube
4D
. Note that the red dot marking of the plug is at 12 o'clock position.
Only the Splitter cable connects to this socket.
