Fhiaba 599 Series, Installation Manual

Page: 29 / 80

27
2
3
1
Installation Guide
Series: All
www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
English
Français
Installation
For a built-in installation, to close gaps between the appliance and
the adjacent cabinets, special side pro À les and aluminum covering
frames are provided.
Operate as follows:
Push the appliance into the installation niche
1
.
If the unit is to be installed inside a niche or within an enclosed
structure, it is necessary to design a ventilation shaft at the back of
the niche to assure proper ventilation at the back of the unit. A 5 mm
gap is suf À cient to prevent overheating. Always mount front panels on
door and drawer before pushing the unit into its À nal position inside the
niche or structure.
Secure the appliance to the adjacent cabinets by À xing to these the
side pro À les previously mounted on the appliance
2
.
To make this operation easier keep the door and the drawer open.
Check the levelling of the appliance, adjusting its feet and wheels
to correct it.
Mount the pro À les the covering frames: À rst insert them laterally and
then push À rmly until a “click” is heard
3
.
Built-in installation single appliance
IMPORTANT: The following instruction for installation apply to all Fhiaba models.