4
the DVR commands described herein. Note that these prefixes are defined using the FF-800, not
FF-8070 commands. If they have been modified for your system, you must use the new prefix
when entering DVR commands into your system (all examples illustrate the default prefix codes).
The suffix codes form the "tail end" of the DVR command syntax. These are the DTMF digits that
specify which DVR command is to be executed and may include one or more digits of user
specified data. In addition, four of these suffix codes can be user defined as shown below.
User Defined suffixes:
Factory Default
Record mail slot
*
Erase last played mail slot
**
Audio Test
***
List active Mail Slots
blank (no digits)
The following list describes the FF-8070 command suffixes. These commands are used to set
system parameters or record system tracks. NOTE: all DVR command digits must be preceded by
a FF-800 SPI prefix digits:
suffix code
DESCRIPTION
00
Play system track
01
Record system track.
01*
Interrogate system track size.
02
Set input source. Selects main or aux. (phone patch) DVR input.
03*
System track erase.
040
Search system track -- short play.
041
Search system track -- long play.
050
lopoff (start) configure.
051
End lopoff (end) configure.
052
Set number of installed DRAMs.
053
Set number of mailbox tracks.
054
Set "Audio Test" suffix.
055
Set "List active slots" suffix
056
Set "Record mail" suffix
057
Set "Erase last played" suffix
0580
Set Voice Mail Auto-play delay time.
0581800
Clear user defined suffixes
0582
Set Voice Mail Auto-erase time.
059
Blank annunciate mode.
05*
Set Security code.
060800
Execute BASIC initialization.
061
ADVANCED initialization code.
066
Force mail box message erase
067800
Save configuration flag modes.
069
Set track interrupt mode.
07
Record system track with no play-back
08
Version request. Responds with the interface model and serial number.
09
Security lock/unlock
User Commands
Input Source Set
Sets source of record audio to the DVR (main or aux)
<spi prefix> + <02> ; <1 or 2>
1 = main, 2 = aux
default
13002
interrogate
Summary of Contents for FF-8070
Page 19: ...FF 8070 Component Layout...