Contents
1 Safety warnings.........................................15
2 Symbols..................................................... 17
3 Intended use..............................................17
4 Technical data........................................... 17
5 Parts of the device.....................................18
6 Preparations..............................................18
7 Battery pack.............................................. 18
8 Commissioning..........................................19
9 Connecting a device.................................. 19
10 Settings......................................................20
11 Working..................................................... 21
12 Remote control..........................................22
13 Warning signals.........................................23
14 Maintenance and care...............................23
15 Transportation...........................................24
16 Environment.............................................. 24
17 General information.................................. 24
1
Safety warnings
WARNING! Read all safety warnings, instructions, illustrations and speci
fications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
– This appliance must not be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge. Children need to be supervised to ensure they do not
play with the device.
– This machine must not be used by people who might have a particularly
adverse reaction to an electric shock (e.g. people with cardiac pace
makers), because the possibility of the machine building up a static
charge cannot be excluded.
– Ensure you are on a firm base. The effects of a shock moment, e.g. due
to antistatic discharge, may lead to accidents.
– WARNING! Operators must be appropriately instructed in the use of
this machine.
– WARNING! Device may contain hazardous dust. Only have the device
maintained and emptied, and only have the filter replaced by an author
ised specialist using suitable protective equipment.
– Always operate with the filter system installed!
WARNING! When extracting dust that exceeds the limit value or large vol
umes of oak or beechwood dust, only extract from one dust source (power
or compressed-air tool).
– Risk of explosion and fire! Do not extract:
– Sparks, glowing particles or hot dust;
– combustible or explosive materials (e.g. magnesium, aluminium, pet
rol, diluting agents);
– aggressive materials (e.g. acid, alkaline solutions, solvents);
English
15
Summary of Contents for CLEANTEC CTLC MIDI I
Page 3: ...3 1 1 2 2x 2x click 2 3 4a 4b 2 1 ...
Page 5: ...8 9 3 2 1 45 45 ...