18
Festo — SFAB-...-PNLK — 2022-08
Commissioning
Switchover of measured value indicator
The measured value indicator can be switched between flow rate, temperature and volume/mass in
RUN mode.
1. Briefly press the [A] or [B] key.
2. Repeat the process with a 1…3 second pause until the desired measured variable is displayed.
7.2
Displaying parameters in SHOW mode
Requirement: the sensor is ready for operation and is in RUN mode.
Switching output OutA or volume output
1. Press the [A] key twice in rapid succession.
Ä
The first parameter set ‘Pin4’/‘bin’ is displayed.
2. Press the [A] pushbutton to display each of the following parameters
At the end, the flow rate values ‘MIN’, ‘MAX’ and ‘AVER’ are displayed.
Switching output OutB or analogue output Anlg
1. Press the [B] pushbutton twice in rapid succession.
Ä
The first set parameter ‘Pin2’/‘ANLG’ or ‘Pin2’/‘bin’ is displayed.
2. Press the [B] pushbutton to display each of the following parameters
