Festo MPS PA, Operating Instructions Manual

Page: 52 / 68

Commissioning Bottling Learning System
52
© Festo Didactic 696690
5. In the next screen, select a recipe. The metered quantities stored in the program, i.e., the number and
the filling time, are displayed.
6. In “Conf. Controller”, check the control parameters.
7. Press the “Start” button to start the recipe (see
chapter 10.4.1 Automatic mode, batch bottling
).
Figure 31: Control screen for automatic operation, continuous
Figure 32: Control screen for automatic operation, batch
Note
If the container VE1 is empty, the message “Fill container VE1” appears in the information field.
When the recipe is finished, you will receive the message "Recipe ready".
8.
Use the "Back" button to return to the main menu.