Festo MPAC-VI, Manual

Page: 12 / 74

2 Product overview
12 Festo – MPAC-VI-EN – 2017-12a – English
2.4 Description of components
2.4.1 Manifold sub-bases and electronics modules
The valves are supplied pneumatically via the manifold sub-bases and supplied electrically via the elec­
tronics module that is installed in the manifold sub-base (
è
Fig. 2.2). The electronics module estab­
lishes how many solenoid coils can be controlled on one valve position. The electronics module is avail­
able only with the manifold sub-base.
2
1
3
1
Manifold sub-base
2
Electronics module
3
Pneumatic supply ducts
Fig. 2.2 Manifold sub-base with electronics module
The valve terminal can be equipped with the following manifold sub-bases:
Design of the manifold sub-bases Type code
Manifold sub-base with working ports (2), (4) and grey electronics module
for actuation by one solenoid coil
VMPAC-AP-14-1
VMPAC-AP-14-B-1
4)
Manifold sub-base with working ports (2), (4) and black electronics mod­
ule for actuation by two solenoid coils
VMPAC-AP-14-2
VMPAC-AP-14-B-2
4)
Manifold sub-base with working ports (2), (4), supply ports (1), (3) and (5)
and grey electronics module for actuation by one solenoid coil
VMPAC-AP-14-SP-1
Manifold sub-base with working ports (2), (4); supply ports (1), (3) and (5)
and black electronics module for actuation by two solenoid coils
VMPAC-AP-14-SP-2
4) Manifold sub-base with drill holes for stud bolt mounting
Tab. 2.4