Festo MPA-ASI Series, Manual

Page: 57 / 208

2. Fitting
2−3
Festo P.BE−MPA−EN en 0802c
Contents of this chapter The MPA−S valve terminal is already assembled when sup
plied from the factory. Accessories such as inscription labels
and manual override caps (optional) must be fitted on site.
This chapter describes how to fit and remove:
The complete MPA−S valve terminal
The inscription labels
The manual override caps
Further information Special information on replacing or adding pneumatic
components can be found in chapter 5.
MPA−S valve terminal with CPX terminal:
Information on fitting the MPA−S valve terminal with
CPXterminal can be found in the CPX system manual.
Information on fitting and removing I/O modules can be
found in the I/O module manual, table Manuals on the
CPX terminal").
Information on fitting modules and components ordered
at a later stage can be found in the leaflet supplied with
the product.