Festo MPA-ASI Series, Manual

Page: 150 / 208

5. Maintenance and conversion
5−22
Festo P.BE−MPA−EN en 0802c
5.3.7 Replacing the manifold boards
MPA−S valve terminal with multipin connection or
AS−Interface
With the multipin connection the electrical manifold sub−base
is constructed on a modular basis. Each sub−base has its own
board. The following manifold boards are available for the
MPA−S valve terminal with multipin connection:
Manifold boards for ... Version
one sub−base one sub−base and a supply
plate
Type: VMPA1−MPM−EV−AB− 8 Type: VMPA1−MPM−EV−AB V − 8 Only for size MPA1:
Board for controlling a total of
8valve coils per sub−base.
Type: VMPA1−MPM−EV−AB− 4 Type: VMPA1−MPM−EV−AB V − 4 For sizes MPA1 and MPA2:
Board for controlling a total of
4valve coils per sub−base.
Type: VMPA2−MPM−EV−AB− 2 Type: VMPA2−MPM−EV−AB V − 2 Only for size MPA2:
Board for controlling a total of
2valve coils per sub−base.
Tab.5/5: Manifold boards type VMPA−MPM−...