Festo MPA-ASI Series, Manual

Page: 164 / 208

5. Maintenance and conversion
5−36
Festo P.BE−MPA−EN en 0802c
MPA−S valve terminal with CPX terminal
Note
Maximum 16 MPA sub−bases are permitted on the MPA−S
valve terminal with CPX terminal and electric supply plate.
Without the electric supply plate 8 MPA sub−bases are
permitted.
Necessary components
For extension you will require:
Components MPA−S valve terminal with ...
CPX terminal multipin connection
One sub−base per:
MPA1: 4 valve positions
MPA2: 2 valve positions
VMPA1−FB−AP−...
VMPA2−FB−AP−...
One electronic module per sub−base VMPA...−FB−EM−... VMPA...−MPM−EMM−...
Valve or cover plates:
MPA1: 4 per sub−base
MPA2: 2 per sub−base
VMPA...−M1H−...
VMPA...−M1H−...
If necessary, additional pneumatic supply plate:
with exhaust plate
with large−surface silencer
VMPA...−FB−SP
VMPA...−FB−SPU
If necessary, additional electric supply plate:
with M18 plug
with 7/8" (4−pin) plug
with 7/8" (5−pin) plug
VMPA−FB−SP−V
VMPA−FB−SP−7/8−V−4POL
VMPA−FB−SP−7/8−V−5POL
For each sub−base or pneumatic supply plate
added the appropriate manifold boards:
Manifold boards for sub−base
Manifold boards for pneumatic supply plate
VMPA1−FB−EV−AB
VMPA1−FB−EV−V
See this chapter,
Tab.5/5