Festo MPA-ASI Series, Manual

Page: 152 / 208

5. Maintenance and conversion
5−24
Festo P.BE−MPA−EN en 0802c
1
Locking clip
1
Fig.5/10: Unlocking the manifold board
Fitting Proceed as follows:
1. Push the manifold board to be fitted into the sub−base
from the right until it clips into position.
Fig.5/11: Fitting the manifold board
2. If the fitted manifold board is the last one in front of the
fright−hand MPA end plate, you must insert the end piece
type MPA into this manifold board.