Festo IFB11-03, Electronic Manual

Page: 87 / 214

4. Commissioning
4−17
Festo P.BE−VIFB11−03−EN en 0503g
4.3.2 Configuration with Philips Dios
First determine the number of input and output bytes.
Please note
Note that the number of inputs per valve terminal is in
creased by 4 status bits if input stages are mounted. The
4inputs provide status information with which internal
coded error messages are transferred to the DLC 100/200.
It is possible to compare the calculated number of bus slaves
and the calculated number of input and output bytes with the
number determined by the DLC 100/200.
After pressing the button CONF", the seven−segment display
shows the following:
number of recognised network modules (e.g. valve ter
minals)
number of input bytes
number of output bytes
Enter the calculated number of input and output bytes (+any
reserves for expansion) in the Resource Hardware Input/
Output Modules" mask.