Festo IFB11-03, Electronic Manual

Page: 76 / 214

4. Commissioning
4−6
Festo P.BE−VIFB11−03−EN en 0503g
4.1.2 Address assignment of the valve terminal
The address assignment of the outputs of a multifunctional
valve terminal depends on the equipment fitted on the valve
terminal. A distinction is made between the following equip
ment fitted:
valves and digital I/O modules.
only valves.
only digital I/O modules.
The basic rules described below apply to the address assign
ment of these fitting variants. A detailed example is given
after each of these basic rules.
Please note
If two addresses are assigned for one valve location, the
following assignment applies:
lower−value address: pilot solenoid 14
higher−value address: pilot solenoid 12
Information on reserving addresses of the valves on the type
04−B valve terminal can be found in the Pneumatics manual
for type 04−B.