Festo EXPT 120, Mechanical Assembly

Page: 14 / 44

3 Assembly and installation
14 Festo – GDCP-EXPT-KM-KOMP-EN – 1204a – English
3.5 Preparations for assembly
3.5.1 Dimensions
Dimensions [mm]
EXPT 45 70 95 120
B1 947 1077 1213 1355
B2 617 703 794 888
B3 549 590 626 672
B4 530 622 705 800
H1 659 727 827 944
H2 493 561 636 710
H3 166 166 191 234
H8 (for EXPT-...-T1 to T4 only) 27 27 27 27
L1 1088 1238 1394 1558
L2 652 727 803 885
Tab. 3.5
3.5.2 Requirements for the assembly site
Note
• Observe the catalogue specifications for the exact positioning of the mounting holes
( www.festo.com/catalogue).
The following conditions must be met, otherwise the range of functions may be restricted:
– enough room for the tripod kinematics to move, including room outside the working space
(see catalogue specifications regarding obstructions www.festo.com/catalogue)
– torsionally rigid, tension-free suspension of the tripod kinematics
– flat bearing surface at the mounting corners
– adequate mounting to absorb the maximum forces ( www.festo.com/catalogue)
– allowance made for the affects of mass and rigidity on positioning accuracy and path accuracy
– adherence to the catalogue specifications for vibration limits, permissible forces and torques
( www.festo.com/catalogue).