Festo EXCM-40 -PF Series, Instructions Manual

Page: 43 / 48

8 Dismantling
Festo – EXCM-40-EN – 2017-11a – English 43
8 Dismantling
8.1 Safety instructions
Warning
Unexpected movement of the product.
Risk of impact and crushing injuries.
Before working on the product, switch off the power supply and secure it against
being switched on again.
Before working on the product, switch off the compressed air supply, vent if neces­
sary and secure it against being switched on again. Pneumatic system parts can still
contain compressed air even when they are switched off. Vent pneumatic system
parts accordingly.
When lifting the product, perform the following measures:
– Secure movable components with transport restraints to prevent unexpected
movement.
– Observe the product weight.
– Observe the position of the centre of gravity.
– Use suitable lifting gear.
– Use all of the transport lugs.
– Adjust the lifting speed.
8.2 Procedure
1. Move the Y-axis (traverse) to the mechanical end position opposite the motors.
2. Disconnect all of the electric cables and pneumatic tubing from the product.
3. Mount the retaining plates with transport lugs and transport restraints (
è
Fig. 4.4).
4. Secure movable parts (e.g. Y-axis (traverse), attachment component, etc.) with cable ties
(
è
Fig. 4.4).
5. Mount transport lugs with support plate to the X-axes (
è
Fig. 4.4).
6. Dismantle the product.
8.3 Recycling
Incorrect disposal is harmful to the environment.
Observe local regulations regarding disposal and the environment.
Observe local regulations for disposal of modules.
Use lubricants (greases, oils) in accordance with the applicable regulations for health
and safety and hazardous substances.