46 / 56
Festo 7DSBCa_en
Note
Note the mounting direction of the scraper ring:
Protruding sealing lip facing outwards, grease reservoir facing inwards.
23. Insert the greased scraper ring into the insert sleeve.
24. Grease the new O-ring with the grease included in the set of wearing parts.
25. Insert the O-ring into the outer slot +-of the insert sleeve.
DSBC-125
1. Grease the O-ring
1
and bearing surface of the excluder
2
using the
grease included in the set of wearing parts.
Note
Note the mounting direction and order:
O-ring between the outside insert sleeve and the excluder.
2. Insert the O-ring and excluder together into the insert sleeve
3
.
1 2 3
All sizes
Note
Note the mounting direction of the insert sleeve: Chamfer faces the bearing cap.
26. Insert the insert sleeve into the bearing cap.
DSBC-32 … 100
27. Grease the O-ring and bearing surface of the excluder using the grease
included in the set of wearing parts.
Note
Note the mounting direction and order:
O-ring between the screwed insert and excluder.
28. Insert the O-ring and excluder together into the screwed insert.
29. Wet the thread of the screwed insert with screw locking agent.
30. Screw the screwed insert into the bearing cap and tighten with the
appropriate tightening torque.
Size
Tightening torque
DSBC-32
4 Nm
DSBC-40
8 Nm
DSBC-50
11 Nm
DSBC-63
11 Nm
DSBC-80
15 Nm
DSBC-100
15 Nm
DSBC-125
• Push together the circlip (e.g. using pliers) and insert into the bearing cap.
