Festo DSBC Series, Repair Instructions

Page: 5 / 56

5 / 56 Festo 7DSBCa_en
Table of contents
4.5 Additional repair steps for DSBC-…-E1 / E2 / E3 (with end-position locking) 35
4.5.1 Structure of the bearing cap with end-position locking 35
4.5.2 Unlocking the end-position locking manually 35
4.5.3 Dismantling the stop cylinder 36
4.5.4 Mounting the bearing or end cap with end-position locking 36
4.5.5 Mounting the lock cylinder 36
4.5.6 Releasing the end-position locking 36
4.6 Repairing the ISO cylinder DSBC-…-T1 / T4 / A1 and DSBC-...-L / U / L1 37
4.7 Requirements 37
4.7.1 Validity 37
4.7.2 Structure of the bearing cap 37
4.7.3 Removing the bearing and end caps 38
4.7.4 Replacing the piston components 38
4.7.5 Inserting the piston rod into the cylinder barrel 39
4.7.6 Repairing and attaching the bearing and end caps 39
4.8 Repairing the ISO cylinder DSBC-…-T3 / A2 42
4.8.1 Requirements 42
4.8.2 Validity 42
4.8.3 Structure of the bearing cap 42
4.8.4 Removing the bearing and end caps 43
4.8.5 Replacing the piston components 43
4.8.6 Inserting the piston rod into the cylinder barrel 44
4.8.7 Repairing and attaching the bearing and end caps 44
4.9 Repairing the ISO cylinder DSBC-…-A6 48
4.9.1 Requirements 48
4.9.2 Validity 48
4.9.3 Structure of the bearing cap 48
4.9.4 Removing the bearing and end caps 49
4.9.5 Replacing the piston components 49
4.9.6 Inserting the piston rod into the cylinder barrel 50
4.9.7 Repairing and attaching the bearing and end caps 51
5 Cleaning and greasing 53
5.1 Cleaning 53
5.2 Greasing 53
5.2.1 Thin grease film 54
5.2.2 Grease reservoir 54
6 Maintenance and care 54
7 Tools 54
7.1 Standard tools 54
7.2 Special tools 54
8 Liability 55