Festo CPV10, Manual

Page: 111 / 164

5. Maintenance and conversion
5−11
Festo P.BE−CPV−EN en 0503g
1
2
3
1
Pneumatic spring valve (Ident. code M or F):
The designation L" on the seal must face forwards.
2
Double−solenoid valve (Ident. code J):
The designation
J" on the seal must face forwards.
3
The seal for valve plates with 2/2 or 3/2−way valves (Ident. codes D, I or C, H,
and N as well as for all end plates is symmetrical and marked with
3/2 .
Fig.5/3: Position and designation of the seals with pneumatic spring valves or double−
solenoid valves (only CPV10/14 valve terminals)