Festo CPV10, Manual

Page: 37 / 164

2. Fitting
2−3
Festo P.BE−CPV−EN en 0503g
Warning
Switch off the following power supplies before undertaking
installation and/or maintenance work:
·
the compressed air supply
·
the power supply for the valve solenoid coils
You can thereby avoid:
uncontrolled movements of loose tubing,
unexpected movements of the connected actuators,
non−defined switching states of the electronic compo
nents.
2.1 CPV valve terminal with individual tubing
Fitting variants
The CPV valve terminal with individual tubing has already
been prepared for integration in a system or machine for the
following fitting variants:
Fitting onto a wall
Fitting onto a hat rail
Fitting onto a stand
Please note
If vibrations, which exceed the following values, occur on
your application:
0.15 mm path at 10...58 Hz
2 g acceleration at 58...150 Hz
You should mount the CPV14 or CPV18 valve terminal on a
wall or on a stand.