Festo CPV10, Manual

Page: 123 / 164

5. Maintenance and conversion
5−23
Festo P.BE−CPV−EN en 0503g
Note the following on CPV valve terminals with MP,
AS−Interface, DI and CP connections
·
Loosen the 4 Philips screws in the sub−base.
·
Pull the sub−base carefully away from the terminal lugs of
the pilot solenoids.
·
Insert the sub−base of the other connection variants (MP,
AS−Interface, DI or CP connection) into the terminal lugs
of the pilot solenoids.
·
Secure the sub−base with the 4 Philips screws.
·
Tighten the screws in diagonally opposite sequence.