Festo CPV10, Manual

Page: 59 / 164

2. Fitting
2−25
Festo P.BE−CPV−EN en 0503g
2.5 Fitting the manual override cover
Covers can be fitted onto the manual override to protect it
against unauthorized use. The covers must be fitted over
each manual override.
The manual override covers are not intended for re−use. Fit
the manual override covers only when you do not require the
manual override any more (e.g. after testing the valves).
Proceed as follows:
·
Clip the covers into the grooves in the manual override
(see diagram).
If your CPV valve terminal is equipped with non−locking man
ual override, you must remove the safety clips before fitting
the manual override covers (see chapter 5, section Conver
sion from non−locking to locking manual override").
1
2
1
1
Guide grooves of the manual override
2
Manual override cover
Fig.2/8: Fitting the manual override covers