Festo CMSX-...-C-U-F1 series, Manual

Page: 35 / 61

CMSX-...-C-U-F1-...
Festo – CMSX-...-C-U-F1-... – 1506a English 35
Pressing the Add or Sub key selects a function in the menu (
è
Fig. 24,
1
). Pressing the Set button
confirms the selection. The current setting is then displayed. A setting can be selected with Add and
Sub (
è
Fig. 24,
2
). Pressing the Set key confirms the current selection and returns to the menu.
Note
Parameter changes become effective immediately after the Set key is pressed. For ex­
ample, digital outputs can change their signal status by changing settings even in the
controller stopped operating status.
MENU
2 CONFIG
*CONFIG*
signal
open
direct
...
6
3
SIGNAL
0-10V
4-20mA
0-20mA
3
6
1
2
1
2
1 2
1
Select function with Add (1) and Sub (2)
2
Select setting with Add (1) and Sub (2)
Fig. 24 Movement in the menu configuration (2) – example SIGNAL
Operation Selection in the CONFIG menu Setting (e.g. SIGNAL)
Briefly press Add 1 Continue to the next selection
Briefly press Sub 2 Back to the previous selection
Briefly press Set 3 Confirm selection Confirm selection and back to
the menu (2)
Press and hold Set 6 Back to the main menu Confirm selection and back to
the main menu
Tab. 17 Operation in the Configuration menu (2)