Festo 8060571, Repair Instructions

Page: 48 / 52

48 / 52 Festo 7ELCC_TB_KFb_en
Note
The lubrication interval S
int
depends on the load acting on the product.
Load factors:
– dusty and contaminated environment
– Nominal stroke
,
2000 mm or
.
300 mm
– Speed
,
2 m/s
– Travel profile
Z
triangular operation (frequent acceleration and braking)
– Ambient temperature
,
40 °C
– Product's time in operation
,
3 years
• If one of these factors applies, halve the lubrication interval S
int
.
• If several factors apply at the same time, divide the lubrication interval by four.
ELCC-TB-KF-60-…
• Add the lubricant in the two lubrication nipples at the front of the slide; note
the quantity of grease per lubrication nipple (

Table).
ELCC-TB-KF-70 / 90 / 110-…
• Add lubricant in the two lubrication nipples at the front of the slide or via
the two lubrication holes on the drive mounting area of the slide plate (In
the as-delivered condition, these lubrication holes are sealed by a grub
screw.), note the quantity of grease per lubrication nipple (
 Table).
ELCC-TB-KF-60 ELCC-TB-KF-70 ELCC-TB-KF-90 ELCC-TB-KF-110
Roller carriage grease quantity per
lubrication nipple
1.7 g 5 g 7.5 g 11.2 g
Festo offers a one‑hand, high‑pressure grease gun with suitable pointed nozzle for lubricating the lubrication nipples
(  Chapter 8.2 on page 49 ).
7 Cleaning
Note
• Do not clean the guide elements (e.g. guide rails).
• Clean with a soft, lint-free cloth and non-abrasive cleaning agents.
• Check the compatibility of the cleaning agent with the materials to be cleaned.