Festo 8060571, Repair Instructions

Page: 42 / 52

42 / 52 Festo 7ELCC_TB_KFb_en
2. Push the magnetic strip with adhesive tape in the rebate of the cylinder
barrel module under the slide module.
3. Align the magnetic strip with adhesive tape, the protective film faces down -
wards.
4. Pull the protective film off the adhesive tape only up to the slide module,
the magnetic strip with adhesive tape may not by pulled out beyond the
bottom of the slide module. Starting at the end cap, stick on the adhesive
tape
4
with the magnetic strip
5
in the rebate of the cylinder barrel mod-
ule
3
.
1 Slide module
2
Roller carriage
3 Cylinder barrel module
4
Adhesive tape
5 Magnetic strip
5
3
1
4
2 3
5. Firmly press on magnetic tape with adhesive tape.
6.
Cut off the protective film at the slide module.
7. Repeat the procedure on the other side of the cylinder barrel module.
8. Push the slide module up to the stop at the other end cap.
9.
Pull off the remaining protective film from the adhesive tape.
10. Stick on the adhesive tape with the magnetic strip in the rebate of the cylin-
der barrel module up to the end cap.
11. Firmly press on magnetic tape with adhesive tape.
12. Repeat the procedure on the other side of the cylinder barrel module.
13. Mount the cover strip (

Chapter 5.4.2 on page 36 ).
5.10 Replacing the measuring tape of the displacement encoder of the
ELCC-TB-KF-60 / 70-…-M1
Note
Destroyed coding of the magnetic strip surface due to external magnetic fields.
• Avoid external magnetic fields ( , 64 mT) on the magnetic strip surface.