49 / 52
Festo 7ELCC_TB_KFb_en
If necessary, remove housing and clean the drive.
• At the same time, push in the locking clip
1
at both ends of the housing
and pull off the housing
2
.
2
1
8
Tools and equipment
This section provides an overview of the tools and aids required to repair and maintain the cantilever axis.
8.1
Standard tools
The following standard tools are required for the repair and maintenance of the cantilever axis:
– Phillips screwdriver
– Torx screwdriver
– Allen key
– Torque spanner/torque screwdriver
– Screwdriver set
– Work scissors
8.2
Special tools
The following special tools are required for repair and maintenance of the cantilever axis:
Designation
Additional information
Festo order no.
Figure
One-hand grease gun LUB-1
Pinpoint nozzle for
miniature, funnel-shaped
lubrication nipples and
lubricating holes
647958
Lubrication adapter LUB-1-TR-I
Lubrication adapter (noz
-
zle pipe Ø 6x200 axial)
647959
Summary of Contents for 8060571
Page 14: ...14 52 Festo 7ELCC_TB_KFb_en 3 1 ELCC TB KF 60 F1 component overview...
Page 16: ...16 52 Festo 7ELCC_TB_KFb_en 3 2 ELCC TB KF 70 F1 component overview...
Page 18: ...18 52 Festo 7ELCC_TB_KFb_en 3 3 ELCC TB KF 90 F1 component overview...
Page 20: ...20 52 Festo 7ELCC_TB_KFb_en 3 4 ELCC TB KF 110 components overview...
