Festo 8034153, Manual

Page: 29 / 100

© Festo Didactic 8034153
29
1 For your safety
1.1 Intended use
Tec2Screen ® may only be used:
•
For its intended purpose in teaching and training applications
•
When its safety functions are in flawless condition
The system is designed in accordance with the current state-of-the-art and recognised safety rules.
Nevertheless, life and limb of the user and third parties may be endangered and the system may be
impaired, if it is used improperly.
The training companies and/or trainers must ensure that all trainees observe the safety precautions
described in this manual. Festo Didactic hereby excludes any liability for damage suffered by trainees, the
training company and/or any third parties which occurs during use of the equipment set in situations which
serve any purpose other than training and/or vocational education, unless such damage has been caused
by Festo Didactic due to malicious intent or gross negligence.
Malfunctions which may impair safety must not be generated in the training environment, and must be
eliminated immediately.
1.2 Pictograms
This manual and the described hardware include warnings concerning possible hazards which may arise if
the system is used incorrectly. The following pictograms are used:
Warning
Non-observance of this pictogram may result in severe personal injury or property
damage.
Caution
Non-observance of this pictogram may result in personal injury or property damage.
Warning
This pictogram indicates danger of being burned if hot surfaces (up to roughly 50° C) are
touched.