Festo 8034153, Manual

Page: 37 / 100

3 Tec2Screen ® base
© Festo Didactic 8034153
37
3.1 Structure and function
The base forms a link between the software on the iPad and the external hardware. The electrical signals
supplied by the hardware are transferred to the iPad via the Connects and the base. These can be then
linked, processed and displayed via the iEasyLab software.
The integrated battery enables stand-alone operation of the base in combination with the iPad. The
multimeter and the digital and analogue inputs can be used in the process.
Note
The 24 V outputs of the Power Connect, Digital I/O Connect and SysLink Connect, as well as the 10 V
outputs of the Analog Output Connect do not function in this mode!
3.2 Commissioning (general)
Proceed as follows:
1.
Insert the iPad (also refer to Chapter 2.2).
2. Insert the Connect into the base and connect it to the peripheral equipment.
3. Connect the power supply (24 V).
4. Switch on the power supply.
5. Start the iEasylab programme.
3.3 Technical data
Electrical/mechanical specifications
Operating voltage / current 24 V DC / 3A
Connection for supply 4 mm safety sockets
2.1 mm barrel connector
Connection for Connects 26-pin miniature plug connector
Battery Integrated 10.8 V / 2.2 Ah battery
Size 148 mm x 245 mm x 40 mm
Weight (without/with iPad Air adapter) 586 g / 661 g
Ambient temperature +5 °C to 35 °C
Electromagnetic compatibility
Emitted interference checked in accordance with EN 61000-6-3
Resistance to interference checked in accordance with EN 61000-6-1
Subject to change