© Festo Didactic 8034153
39
5
Analog Input Connect
The port assignment of the Connect that
has been inserted into the base will be
displayed on the iPad after starting the
iEasyLab software.
5.1
Structure and function
The Analog Input Connect allows analogue voltages to be read via 2 input channels. A voltage range of
0 V...10 V or ±10 V can be set in iEasyLab under the “Settings” menu for the Connect. The electrical
connection is established via 4 mm safety sockets.
Assignment
Socket 0
Socket 1
Socket 2
Socket 3
Channel AIN1: Signal
Channel AIN1: GND
Channel AIN2: Signal
Channel AIN2: GND
Note
When connecting the analogue signals make sure that the earth wiring is correct.
5.2
Commissioning the Connect
Proceed as follows:
1.
Insert the Connect into the base.
2.
The Connect is detected automatically by the base.
3.
If the iEasyLab software has been started, the Connect will be detected and shown on the display.
4.
Select the appropriate input voltage range.
Summary of Contents for 8034153
