MACHINES AND
ACCESSORIES
Page 30 of 44
10.2.2
Making angled cuts
Cutting capacity
The maximum cutting thickness is 100 x 170 mm.
1. Loosen the knob at the front of the work area.
2. Grasp the handle with one hand and the knob with the other, then rotate the base to the
left or right at the desired angle, checking the value on the graduated scale.
3. Repeat the steps from 1 to 6, as described in paragraph 10.2.1.
Figure 23 - Adjusting the cutting angle.
10.2.3
Making inclined cuts
Cutting capacity
The maximum cutting thickness is 67 x 170 mm.
1. Rotate the lever positioned at the back of the machine (
22
).
2. Grasp the motor-blade unit with both hands and tilt it in the desired direction.
This will make it possible to tilt the saw to the pre-marked position on the graduated scale
where the corresponding angle is shown (see the
3.
Figure 24
).
8
21
fervi.com