MACHINES AND
ACCESSORIES
Page 22 of 44
In this configuration, the upper part of the blade is not used, and is protected by the upper
casing that is locked in the closed position by a screw (28) and is integral to the table.
Figure 13 – Fixed casing above the table.
When the machine is used in "bench saw" mode it is necessary to position the fixed guard
below the blade before lowering it so as to push the safety pin and close the hook (see p. 5.3
and
Figure 7
).
In this position, with the table horizontal, it is possible to remove the fixed protection (
Figure
13
) but the movable guard remains and in a position which is adjusted automatically during
cutting.
Figure 14 – Upper movable guard.
Safety accessory
When using the machine in "bench saw" mode it may be necessary to use the workpiece
pusher accessory supplied, especially when small pieces are being machined.
Figure 15 – Workpiece pusher accessory.
Stabilizers
Fixed casing on the
blade above the table
28
fervi.com
