MACHINES AND
ACCESSORIES
Page 28 of 44
10 OPERATION
10.1Instructions for Use
Machine operation
The
mitre saw with table stand (Art. 0275)
should only be used for cutting wood.
Do not cut metal parts, make sure there are no nails or other metal parts in the wood
being machined.
Do not cut beams of dimensions exceeding the maximum permissible cutting capacity (see
Technical Specifications).
Risk of abrasion and/or cutting
Before using the machine, make sure that it is rigidly fixed to the workbench to prevent
unwanted movement or loss of stability.
Wear appropriate personal protective equipment (PPE).
As anticipated, the
Mitre saw with table stand (Art. 0275)
can perform vertical cuts,
inclined at ± 45° to the vertical and angled between -45° and +45° by rotating the support
base.
10.2Use of the mitre saw - Cutting from the top
Cutting hazard
Make sure the machine is in the correct configuration before starting operation.
Check that all guards are in place and that the safety systems are operational
Always use the grip to hold the workpiece in place.
Cutting capacity
The maximum cutting thickness is 100 x 170 mm.
To operate correctly, proceed as follows:
fervi.com
