MACHINES
AND
ACCESSORIES
Page 5 of 44
1 INTRODUCTION
The purpose of this manual is to provide the knowledge necessary for the use and
maintenance of the
Mitre saw with table stand Art. 0275
and create a sense of
responsibility and knowledge of the capabilities and limitations of the device entrusted to the
operator.
As the machine is entrusted to experienced and skilled operators, the following machine must
be perfectly known by the operator if you want it to be used safely and effectively.
Operators must be properly trained and prepared, so make sure that this manual is read and
consulted by the staff responsible for commissioning, operation and maintenance of the Mitre
saw with table stand. This is to make all operations the safest and most effective possible for
those who carry out these tasks.
Therefore, it is imperative to strictly comply with the requirements in this manual, a
necessary condition for safe and satisfactory operation of the machine.
Before starting operation, installation and use of the Mitre saw with table stand, authorized
staff must therefore:
read this technical document carefully;
know which protections and safety devices are available on the machines, their location
and how they work.
It is the responsibility of the buyer to ensure that users are properly trained, that they are
aware of all the information and instructions in this document and that they are aware of the
potential risks that exist while working with the
Mitre saw with table stand
.
The manufacturer waives any and all responsibility for damage to people and/or
things caused by non-observance of the instructions in this manual.
The
Mitre saw with table stand
was designed and built with mechanical guards and safety
devices designed to protect the operator/user from possible injury. It is strictly forbidden to
modify or remove guards, safety devices and caution labels. If you do so temporarily (for
example, for the purposes of cleaning or repair), make sure that no one can use the machine.
Modifications to the machines carried out by the user must be considered their sole
responsibility, therefore the manufacturer declines all responsibility for any damage
caused to persons and/or property resulting from maintenance performed by
unqualified personnel and in a manner different from the operating procedures
shown below.
fervi.com
