Fervi 0657 Use And Maintenance Manual Download Page 25

Page: 25 / 69

MACHINES AND

ACCESSORIES

Page 25 of 69

l r

f r

rod

uct

ion

anu

ocu

ent

ati

ach

. I

t i

for

uce

, p

lis

for

ati

Cop

THE FOLLOWING IS STRICTLY PROHIBITED!



Installing and using the machine on surfaces that are not sufficiently flat and smooth.



Installing and using the machine on surfaces that are not hard and strong enough to

support its weight.



Installing and using the machine outdoors.



Using the machine in a dark place.



Allowing untrained personnel to use the machine.



Operating this machine without being psychophysically fit;



Allowing untrained and unqualified personnel to carry out maintenance, and without

complying with the procedures specified in this manual.



Performing maintenance operations in insufficient conditions of lighting and/or visibility.



Performing maintenance and or cleaning without disconnecting the power supply.



Changing the machine's electrical system.



Moving the machine without using suitable lifting equipment.

fervi.com

Summary of Contents for 0657






































































Search results

Summary of Contents for 0657

Reviews:

Fervi 0657, Use And Maintenance Manual, Page: 25 / 69

Search results

Summary of Contents for 0657

Reviews: