Ferroli RPA 16, Installation And Operation Manual

Page: 4 / 48

4
MAIN FEATURES
General rules
- This manual and the wiring diagram supplied with the unit must be kept in a dry place, ready to hand for future
consultation.
- This manual has been compiled to ensure that the unit is installed in the correct way and to supply comprehensi-
ve information about how to correctly use and service the appliance. before proceeding with the installation
phase, please carefully read all the information in this manual, which describes the procedures required
to correctly install and use the unit.
- Strictly comply with the instructions in this manual and conform to the current safety standards.
- The appliance must be installed in accordance with the laws in force in the country in which the unit is installed.
- Unauthorized tampering with the electrical and mechanical equipment will VOID THE WARRANTY.
- Check the electrical specifications on the identification plate before making the electrical connections. Read the
instructions in the specific section where the electrical connections are described.
- If the unit must be repaired for any reason, this must only be done by a specialized assistance center recognized
by the manufacturer and using genuine spare parts.
- The manufacturer also declines all liability for any damage to persons or property deriving from failure of the infor-
mation in this manual to correspond.
- Proper uses: this series of chillers is designed to produce cold or hot water to use in systems for condi-
tioning/heating purposes. The units are not suitable for the production of domestic hot water. Any use dif-
fering from this proper use or beyond the operating limits indicated in this manual is forbidden unless pre-
viously agreed with the manufacturer.
Safety prescriptions
The units have been designed to comply with the European standards governing safety matters. They thus comply
with the provisions established by Directive 89/392/EEC, 91/368/EEC, 93/44/EEC and the successive modifications
included in 93/68/EEC.