11
SAFETY REGULATIONS
Strictly comply with the following regulations to prevent injuries to the operator or damage to the machine.
•
This use and installation manual is an integral part of the machine. It must be kept with care and be ready to hand
should the operators require it for consultation.
•
Failure to comply with the instructions in this manual or inadequate installation of the conditioner may void the war-
ranty. Moreover, the Manufacturer shall not be liable for direct and/or indirect damages due to incorrect
installation or for damages caused by conditioners installed by inexpert or unauthorized personnel.
•
Only specialized and authorized persons may install and service the appliance.
•
Work in a clean, uncluttered place when installing the equipment.
•
It is absolutely forbidden to touch moving parts or to get between the same.
•
Before starting the appliance, make sure that the various components and the entire system are in perfect and
safe conditions.
•
Strictly comply with the routine maintenance operations.
•
Insist on genuine spare parts if components need replacing. Failure to do so will void the warranty.
•
Do not remove or tamper with the safety devices.
•
Disconnect the electric power source before proceeding with any work on the machine.
•
Do not place anything on the banks and/or the top part of the appliance.
•
Do not push items through the protective fan grilles or allow objects to drop through.
•
The bank surface is sharp. Do not touch it without protective gloves.
•
The appliance is preloaded with refrigerating gas that is damaging for the ozone. Do not allow this gas to acci-
dentally escape.
•
Carefully read the stickers on the machine. Never cover them and replace them immediately should they become
damaged.
•
Do not use the machine in an explosive atmosphere.
•
The power line must be regularly grounded.
•
If the power flex has been damaged, stop the machine if it is operating, and have the flex immediately replaced
by an authorized electrician.
•
The power line of all models must be sectioned, on the supply side of the conditioner, by an automatic switch at
the user’s charge. The breaking capacity of this switch must not be less than 4.5kA.
•
The machine must be stored at a temperature between -25°C and 55°C.
•
Use a powder extinguisher in the event of a fire outbreak. Do not use water.
•
If the machine operates in a faulty way, make sure that this does not depend on failure to carry out routine main-
tenance. Failing this, ask to have the machine checked by a specialized technician.
•
If the exterior unit must be dismantled, it is advisable to have the job done by an authgorized technical service
center.
•
The machine must not be dumped if it is to be scrapped since it contains materials that must be recycled or dis-
posed of by authorized centers.
•
Do not wash the machine with direct or pressurized jets of water or with corrosive substances.
The Manufacturer and after sales-service network are at your disposal for prompt and accurate technical
assistance and for anything else able to ensure the best operation and achieve the utmost efficiency from
your appliance.
Summary of Contents for RPA 16
