FERREX 808470, User Manual

Page: 12 / 36

MODEL No.: PRG101, PRODUCT No.: 808470
9
• Follow the material and solvent manufacturer’s warnings and instructions.
Know the contents of the paints and solvents being sprayed. Read all
Material Safety Data Sheets (MSDS) and container labels provided with the
paints and solvents. Follow the paint and solvent manufacturer’s safety
instructions .
• Use extreme caution when using coating materials with a flashpoint below
70ºF (21ºC). This appliance is not suitable for coating materials with a
flashpoint below 70ºF (21ºC). Flashpoint is the temperature that a fluid can
produce enough vapors to ignite.
• Plastic can cause static sparks. Never hang plastic to enclose a spray area. Do
not use plastic drop cloths when spraying flammable materials.
• Use lowest possible pressure to flush equipment.
• Do not spray onto pump assembly.
HAZARD: EXPLOSION HAZARD DUE TO INCOMPATIBLE MATERIALS
Will cause property damage or severe injury
PREVENTION:
• Do not use materials containing bleach or chlorine.
• Do not use halogenated hydrocarbon solvents such as bleach, mildewcide,
methylene chloride and 1,1,1 - trichloroethane. They are not compatible
with aluminum.
• Contact your coating supplier about the compatibility of material with
aluminum.
HAZARD: GENERAL
Causing severe injury or property damage.
PREVENTION:
• Read all instructions and safety precautions before operating equipment.
• Follow all appropriate local, state, and national codes governing ventilation,
fire prevention, and operation.
• Use only manufacturer authorized parts. User assumes all risks and liabilities
when using parts that do not meet the minimum specifications and safety
requirements of the pump manufacturer.
• Before each use, check all hoses for cuts, leaks, abrasion or bulging of cover.
Check for damage or movement of couplings. Immediately replace the hose
if any of these conditions exist. Never repair a paint hose. Replace it with
another grounded high- pressure hose.