FERREX 808470, User Manual

Page: 10 / 36

MODEL No.: PRG101, PRODUCT No.: 808470
7
PREVENTION:
• NEVER aim the gun at any part of the body.
• Do not aim the gun at, or spray any person or animal.
• NEVER allow any part of the body to touch the fluid stream. DO NOT allow
body to touch a leak in the fluid hose.
• NEVER put your hand in front of the gun. Gloves will not provide protection
against an injection injury.
• ALWAYS lock the gun trigger, shut the pump off, and release all pressure
before servicing, cleaning the tip or guard, changing tip, or leaving
unattended. Pressure will not be released by turning off the motor. The
PRIME/SPRAY knob must be turned to PRIME to relieve the pressure. Refer to
the PRESSURE RELIEF PROCEDURE (page 15) described in the manual.
• ALWAYS keep the tip guard in place while spraying. The tip guard provides
some protection but is mainly a warning device.
• ALWAYS remove the spray tip before flushing or cleaning the system.
• Paint hose can develop leaks from wear, kinking and abuse. A leak can
inject material into the skin. Inspect the hose before each use. Do not use
hose to lift or pull equipment.
• NEVER use a spray gun without a working trigger lock and trigger guard in
place.
• All accessories must be rated at or above 3000 PSI/ 20.68Mpa. This includes
spray tips, guns, extensions, and hose.
NOTE TO PHYSICIAN:
Injection into the skin is a traumatic injury. It is important to treat the
injury as soon as possible. DO NOT delay treatment to research toxicity.
Toxicity is a concern with some coatings injected directly into the blood
stream. Consultation with a plastic surgeon or reconstructive hand
surgeon may be advisable.
HAZARD: HAZARDOUS VAPORS
Paints, solvents, insecticides, and other materials can be harmful if inhaled or
come in contact with the body.
Vapors can cause severe nausea, fainting, or poisoning.