57
Using Navigation
•
&DU
This setting is the default setting. It
provides sufficient accuracy for the
ETA calculation for most drivers.
•
9DQ
With this selection the Infotainment
assumes that you need a bit longer for
the planned route. This setting may be
selected e.g. for a slower vehicle or
higher traffic congestion.
•
6HWIUHHO\
Using this selection a calculation of
the estimated arrival time can be
adapted to personal preferences.
X
Switch the desired setting on (
) by
pressing the turn/push control
.
When selecting
6HWIUHHO\
you then need
to select the desired setting. A control
range of 50% – 200% is available. The
value 100% stands for the adjustment
&DU
. For a higher percentage a later
arrival time will be calculated.
X
Turn the turn/push control
in
order to adjust the desired percentage
value.
X
Press the turn/push control
to
confirm the selection.
Unit of Measure
You can adjust calculations of distances
from the metric system (display in
meters and kilometers) to the Imperial
system (display in feet and miles) and
vice versa.
X
Mark the entry
8QLW RI PHDVXUH
in the
options menu.
X
Press the turn/push control
to
confirm the selection.
X
Select among
0HWULF
and
,PSHULDO
(switched on =
).
Note:
Only one of the settings can be active
(
) at a time.
2093
Note:
Only one of the two settings can be
active (
) at a time.
2094
2095
