Ferrari GTC 4 Lusso, Roadside Assistance Manual

Page: 6 / 45

6
Starting the vehicle
Homologation
The installed electronic alarm system complies with EU (European Union)
regulations on electromagnetic compatibility and it is marked accordingly.
For those markets that require the transmitter and/or receiver marking,
the homologation number is found on the component.
Doors
When a door is opened or closed, the window automatically moves
down by approximately 2 centimetres (to its “target position”) to avoid
colliding with the upper weather strip.
When the door is closed, the window automatically moves up until it
reaches the “upper limit”.
Opening from the outside
Using the remote control, deactivate the alarm and the central door
locking system, or turn the key in the lock to deactivate the central door
locking system.
To open the door, pull handle A : the window will move down to its “target
position”. When the door is closed, the window will move up until it meets
the upper limit.
A
Locking and opening the doors from the inside
Warning
Always carefully check manually that the doors have been closed
properly to prevent them from opening while driving.
Both doors can be locked by activating/deactivating the
“LOCK/UNLOCK” button
B on the roof panel. To lock the doors, press
button B; when the door lock is activated, the light on button B comes on.
To deactivate the door lock, press button B until the light goes out.
The rolling lock function, which automatically locks the doors when the
vehicle speed reaches or exceeds 20 km/h, may be activated from the “Car
settings” menu accessible from the left TFT display of the instrument
panel.
If you pull handle C to open the door, the window will move down to its
target position. When the door is closed, it will move up until it meets its
upper limit.
If handle C is lifted without opening the door, the window will move
down to its target position and stop and if the door is not opened within
2 seconds, the window will move back up until it meets the upper limit.
Therefore, to open the door, release handle
C and pull it again.
When the opening handle is operated, both doors are unlocked.